6306

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761087

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Locking Device	No Locking Device
Bore Type	Round Bore
I.D.	30 mm
Enclosure	Open
Preload Level	None
Cage Material	Pressed Steel
Limiting Speed - Oil	12000 rpm
Precision	Standard
Static Load Rating [Max]	3,380.00 lbf
Seal Material	None
Ball Material	Steel
Radial Internal Clearance	Normal
Outer Ring Width	19 mm
Snap Ring	No Snap Ring
Inch/Metric	Metric Bore
Material	Steel
O.D. Type	Straight
Lubricant	Oil Preservative
Contact Angle	0°
icNumber	7697551
Width	19 mm
No. in Set	Single Bearing
Inner Ring Width	19 mm
Radial Internal Clearance Specification	Normal Clearance
Seal Type	Unsealed
Bearing Type	Radial
Capacity	Standard Capacity
Limiting Speed - Grease	9500 rpm
Precision Level	Standard (ABEC 1)
Dynamic Load Rating	5,940.00 lbf
O.D.	72.0000 mm
Rows of Balls	Single
Cage Type	Metal
Corner Radius [Min]	1.10 mm
Weight	0.76 LB
EAN or UPC	29176016691