6309

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761289

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Bore Type	Round Bore
I.D.	45 mm
Precision Level	Standard (ABEC 1)
Contact Angle	0°
Cage Material	Pressed Steel
icNumber	7697560
Bearing Type	Radial
Preload Level	None
O.D. Type	Straight
Inner Ring Width	25 mm
Capacity	Standard Capacity
Dynamic Load Rating	12,511.00 lbf
Limiting Speed - Grease	6700 rpm
Width	25 mm
Radial Internal Clearance Specification	Normal Clearance
Inch/Metric	Metric Bore
Radial Internal Clearance	Normal
Precision	Standard
Corner Radius [Min]	1.50 mm
O.D.	100.0000 mm
Seal Type	Unsealed
Seal Material	None
Cage Type	Metal
Locking Device	No Locking Device
Outer Ring Width	25 mm
Rows of Balls	Single
Ball Material	Steel
Limiting Speed - Oil	8000 rpm
Snap Ring	No Snap Ring
Enclosure	Open
Static Load Rating [Max]	7,210.00 lbf
Lubricant	Oil Preservative
No. in Set	Single Bearing
Material	Steel
Weight	1.841 LB
EAN or UPC	29176016967