6313

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761521

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Corner Radius [Min]	2.10 mm
Lubricant	Oil Preservative
Inch/Metric	Metric Bore
icNumber	7699329
Seal Type	Unsealed
Width	33 mm
Radial Internal Clearance	Normal
Snap Ring	No Snap Ring
Dynamic Load Rating	21,835.00 lbf
Radial Internal Clearance Specification	Normal Clearance
Precision	Standard
Locking Device	No Locking Device
O.D.	140.0000 mm
Preload Level	None
Ball Material	Steel
I.D.	65 mm
Cage Type	Metal
Enclosure	Open
Outer Ring Width	33 mm
No. in Set	Single Bearing
Seal Material	None
Contact Angle	0°
Capacity	Standard Capacity
O.D. Type	Straight
Bearing Type	Radial
Material	Steel
Precision Level	Standard (ABEC 1)
Static Load Rating [Max]	13,450.00 lbf
Limiting Speed - Oil	6000 rpm
Limiting Speed - Grease	4800 rpm
Inner Ring Width	33 mm
Rows of Balls	Single
Bore Type	Round Bore
Cage Material	Pressed Steel
Weight	4.661 LB
EAN or UPC	29176017322