6313ZZC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761525

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

icNumber	7696024
Seal Type	Non-Contact Seals
Limiting Speed - Grease	4800 rpm
Ball Material	Steel
Limiting Speed - Oil	6000 rpm
Locking Device	No Locking Device
No. in Set	Single Bearing
Enclosure	Double Shielded
Corner Radius [Min]	2.10 mm
Inch/Metric	Metric Bore
Cage Type	Metal
Outer Ring Width	33 mm
Radial Internal Clearance Specification	Greater Than Normal Clearance
Inner Ring Width	33 mm
O.D. Type	Straight
Lubricant	Mul-Temp SRL
Material	Steel
Snap Ring	No Snap Ring
Rows of Balls	Single
Cage Material	Pressed Steel
Precision Level	Standard (ABEC 1)
Contact Angle	0°
Width	33 mm
Bearing Type	Radial
Precision	Standard
I.D.	65 mm
Capacity	Standard Capacity
Dynamic Load Rating	21,835.00 lbf
Seal Material	Metal
Preload Level	None
Radial Internal Clearance	C3
Bore Type	Round Bore
Static Load Rating [Max]	13,450.00 lbf
O.D.	140.0000 mm
Weight	4.63 LB
EAN or UPC	29176017391