6314ZZC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761564

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Limiting Speed - Grease	4500 rpm
Static Load Rating [Max]	15,300.00 lbf
Temperature Range [Min]	-22 °F
Radial Internal Clearance Specification	Greater Than Normal Clearance
Precision Level	Standard (ABEC 1)
Ball Material	Steel
Locking Device	No Locking Device
Seal Material	Metal
Bore Type	Round Bore
Capacity	Standard Capacity
O.D.	150.0000 mm
Inch/Metric	Metric Bore
icNumber	7695909
Rows of Balls	Single
Seal Type	Non-Contact Seals
Cage Type	Metal
Radial Internal Clearance	C3
Precision	Standard
Snap Ring	No Snap Ring
Outer Ring Width	35 mm
Inner Ring Width	35 mm
Enclosure	Double Shielded
Lubricant	Mul-Temp SRL
Dynamic Load Rating	24,549.00 lbf
Bearing Type	Radial
Corner Radius [Min]	2.10 mm
Temperature Range [Max]	230 °F
I.D.	70 mm
Limiting Speed - Oil	5300 rpm
Material	Steel
Fillet Radius	2 mm
O.D. Type	Straight
Origin	Single Row Radial
Width	35 mm
Contact Angle	0°
Preload Level	None
No. in Set	Single Bearing
Cage Material	Pressed Steel
Weight	5.726 LB
EAN or UPC	29176017476