6315

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761590

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Material	Steel
Outer Ring Width	37 mm
Cage Type	Metal
Limiting Speed - Grease	4300 rpm
Preload Level	None
Seal Material	None
Bore Type	Round Bore
Rows of Balls	Single
Cage Material	Pressed Steel
Snap Ring	No Snap Ring
Width	37 mm
Radial Internal Clearance	Normal
Inner Ring Width	37 mm
Lubricant	Oil Preservative
I.D.	75 mm
O.D.	160.0000 mm
No. in Set	Single Bearing
Precision	Standard
Static Load Rating [Max]	17,400.00 lbf
Corner Radius [Min]	2.10 mm
O.D. Type	Straight
Precision Level	Standard (ABEC 1)
Radial Internal Clearance Specification	Normal Clearance
Inch/Metric	Metric Bore
Contact Angle	0°
Bearing Type	Radial
Seal Type	Unsealed
Ball Material	Steel
Capacity	Standard Capacity
Limiting Speed - Oil	5000 rpm
Locking Device	No Locking Device
Enclosure	Open
Dynamic Load Rating	26,674.00 lbf
Weight	6.783 LB
EAN or UPC	29176017483