6320ZZC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761717

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

O.D. Type	Straight
Cage Type	Metal
icNumber	7696242
Lubricant	Mul-Temp SRL
No. in Set	Single Bearing
O.D.	215.0000 mm
Precision	Standard
Enclosure	Double Shielded
Cage Material	Pressed Steel
Locking Device	No Locking Device
Outer Ring Width	47 mm
Bore Type	Round Bore
Limiting Speed - Oil	3400 rpm
Radial Internal Clearance	C3
Rows of Balls	Single
Preload Level	None
Snap Ring	No Snap Ring
Precision Level	Standard (ABEC 1)
Capacity	Standard Capacity
Limiting Speed - Grease	2800 rpm
Width	47 mm
I.D.	100 mm
Corner Radius [Min]	3.00 mm
Inch/Metric	Metric Bore
Contact Angle	0°
Seal Material	Metal
Material	Steel
Radial Internal Clearance Specification	Greater Than Normal Clearance
Ball Material	Steel
Bearing Type	Radial
Static Load Rating [Max]	31,800.00 lbf
Seal Type	Non-Contact Seals
Dynamic Load Rating	38,906.00 lbf
Inner Ring Width	47 mm
Weight	15.456 LB
EAN or UPC	29176017889