Find a Service Center
- Ball Bearing
- Pillow Block
- 25 mm Shaft Diameter
- 132 mm Bolt Hole Spacing
| End Type | Open End |
| Housing Construction | 1 Piece |
| Dynamic Load Rating | 4750 lbf |
| Seal Material | Nitrile Rubber |
| Shaft Height | 45 mm |
| Bolt Hole Spacing | 132 mm |
| Bearing Insert | UC305D1 |
| Temperature Range [Max] | 250 °F |
| Housing Length | 175 mm |
| Static Load Rating [Max] | 2450 lbf |
| Shaft Dia. | 25 mm |
| Mounted Unit Duty | Heavy-Duty |
| RPM [Max] | 5400 rpm |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Metric |
| Base Height | 15 mm |
| Bearing Type | Ball Bearing |
| Lubrication | Relubricatable |
| Center of Bearing from Back of Inner Ring | 15 |
| Seal Type | Contact Seals |
| Bearing Width | 38 mm |
| Base Width | 45 mm |
| Housing Width | 45.5 mm |
| Housing Height | 85 mm |
| Series | UCP/UCPX |
| Housing Material | Cast Iron |
| Housing No. | P305D1 |
| Groove Length | 20 |
| Locking Device | Setscrew Locking Collar |
| Weight | 3.131 LB |
| EAN or UPC | 4547359001693 |
