Parker's B3 and B5 series three-way., body ported valves are ideal for controlling larger single-acting cylinders, air bags and vacuum generators. Body ported for in-line, direct pipe porting. The same valve can also be used on Parker's IEM (Inlet/Exhaust Manifold), allowing more than one valve to be mounted on a common base. Featuring Parker's exclusive Wear Compensation System, expect millions of non-lubricated cycles from this valve. Electrical connections are easy using Parker's 15 mm DIN-style connectors. Flush non-locking overrides are standard.
features
IEM (inlet/exhaust manifold)
Factory prelubricated
CE approved
Maximum Performance – low friction, fast response, lower operating pressures and less wear
Long Cycle Life – under pressure, radial expansion of the seal occurs to maintain sealing contact with the value bore
NonLube Service – no lubrication required for continuous valve shifting
Bi-Directional Spool Seals – common spool used for any pressure, including vacuum
Spool Seal Type
Buna-N
Return Type
Spring
Length
4.200 in
Engineering Level
C
Pilot Exhaust
Vented Pilot Exhaust
Actuator Type
Solenoid
Temperature Range [Min]
5 °F
Port Size
1/8
Valve Type
3-Way, 2 Position
Cv Flow
0.75
Temperature Range [Max]
120 °F
Port Type
NPT
Wiring Options
None
Width
0.710 in
Series
B3
Spool Description
Normally Closed
Valve Duty
Standard Duty
Solenoid
Single
Operating Pressure Range
Vacuum to 145 psi
Pilot Source
Internal Pilot Supply - Port 1
Overrides
Flush - Non-Locking Override
Outlet Port
1/8 in NPT
Installed Options
None
Voltage Rating
24 VDC
Valve Body Style
Inline
Height
1.660 in
Stations
N/A
Operation
Electric
Coil Style
15 mm 3-Pin DIN 43650C
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
