Parker's B3 and B5 series three-way., body ported valves are ideal for controlling larger single-acting cylinders, air bags and vacuum generators. Body ported for in-line, direct pipe porting. The same valve can also be used on Parker's IEM (Inlet/Exhaust Manifold), allowing more than one valve to be mounted on a common base. Featuring Parker's exclusive Wear Compensation System, expect millions of non-lubricated cycles from this valve. Electrical connections are easy using Parker's 15 mm DIN-style connectors. Flush non-locking overrides are standard.
features
IEM (inlet/exhaust manifold)
Factory prelubricated
CE approved
Maximum Performance – low friction, fast response, lower operating pressures and less wear
Long Cycle Life – under pressure, radial expansion of the seal occurs to maintain sealing contact with the value bore
NonLube Service – no lubrication required for continuous valve shifting
Bi-Directional Spool Seals – common spool used for any pressure, including vacuum
Coil Style
15 mm 3-Pin DIN 43650C
Operation
Electric
Temperature Range [Max]
120 °F
Stations
N/A
Temperature Range [Min]
5 °F
Voltage Rating
120 VAC
Valve Body Style
Inline
Wiring Options
None
Width
1.180 in
Solenoid
Single
Pilot Exhaust
Vented Pilot Exhaust
Spool Description
Normally Closed
Installed Options
None
Port Type
NPT
Valve Type
3-Way, 2 Position
Outlet Port
1/4 in NPT
Overrides
Flush - Non-Locking Override
Operating Pressure Range
Vacuum to 145 psi
Spool Seal Type
Buna-N
Actuator Type
Solenoid
Valve Duty
Standard Duty
Pilot Source
Internal Pilot Supply - Port 1
Cv Flow
1.4
Engineering Level
C
Port Size
1/4
Length
5.290 in
Series
B5
Return Type
Spring
Height
2.060 in
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
