Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 2" Stroke
- Steel Rails
- Composite Bearing
- 40 mm Bore ISO Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
| Slide Orientation | Right Hand (Standard) |
| Positions | 2 Position |
| Stroke | 2 in |
| Flow Controls | w/o Flow Controls |
| Temperature Range [Min] | 0 °F |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Support Rod Material | Steel |
| Proximity Sensor Code | J1 |
| Bumpers - Slide | No Bumpers |
| Series | HBT |
| Bearing Type | Composite Bearing |
| Base Wt. | 8.86 lb |
| Port Size | 1/4 |
| Intermediate Stroke | N/A |
| Cylinder Type | ISO Pneumatic Cylinder |
| Cylinder Seal Material | Buna-N |
| Temperature Range [Max] | 165 °F |
| Cylinder Bore Size | 40 mm |
| Proximity Sensor | Prox Ready, 12 mm |
| Pressure [Max] | 150 psi |
| Slide Configuration Option Code | A |
| Port Location | Standard (Position 1) |
| Shock Absorbers - Slide | Shock Absorber w/Stroke Adjuster (Both Ends) |
| Support Rod Diameter | 20 mm |
| Weight per Inch | 0.48 lb |
| Port Type | BSP |
| Slide Type | Thrust Slide |
| Cushions - Slide | No Cushions |
| Weight | 9.82 LB |
