Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 4" Stroke
- Steel Rails
- Composite Bearing
- 1 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
| Proximity Sensor | No Proximity Sensor |
| Flow Controls | w/o Flow Controls |
| Pressure [Max] | 150 psi |
| Weight per Inch | 0.48 lb |
| Cushions - Slide | Cushioned (Both Ends) |
| Slide Type | Thrust Slide |
| Support Rod Material | Steel |
| Port Location | Standard (Position 1) |
| Temperature Range [Min] | 0 °F |
| Port Size | 1/4 |
| Slide Configuration Option Code | A, C |
| Cylinder Bore Size | 1.5 in |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Port Type | NPTF |
| Series | HBT |
| Positions | 2 Position |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Stroke | 4 in |
| Temperature Range [Max] | 165 °F |
| Base Wt. | 8.86 lb |
| Proximity Sensor Code | None |
| Cylinder Seal Material | Buna-N |
| Shock Absorbers - Slide | Shock Absorber w/Stroke Adjuster (Both Ends) |
| Bumpers - Slide | No Bumpers |
| Intermediate Stroke | N/A |
| Slide Orientation | Right Hand (Standard) |
| Bearing Type | Composite Bearing |
| Support Rod Diameter | 20 mm |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Weight | 10.78 LB |
