Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 5" Stroke
- Steel Rails
- Composite Bearing
- 1 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
| Temperature Range [Max] | 165 °F |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Cylinder Bore Size | 1.5 in |
| Slide Orientation | Right Hand (Standard) |
| Intermediate Stroke | N/A |
| Proximity Sensor Code | J |
| Base Wt. | 8.86 lb |
| Series | HBT |
| Slide Type | Thrust Slide |
| Stroke | 5 in |
| Positions | 2 Position |
| Cylinder Seal Material | Buna-N |
| Proximity Sensor | Prox Ready, 8 mm |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Port Size | 1/4 |
| Cushions - Slide | No Cushions |
| Slide Configuration Option Code | B4 |
| Temperature Range [Min] | 0 °F |
| Flow Controls | w/o Flow Controls |
| Shock Absorbers - Slide | No Shock Absorber |
| Bearing Type | Composite Bearing |
| Support Rod Diameter | 20 mm |
| Support Rod Material | Steel |
| Port Type | NPTF |
| Bumpers - Slide | Bumpers w/Adjustable Stop Collar (Both Ends) |
| Weight per Inch | 0.48 lb |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Pressure [Max] | 150 psi |
| Port Location | Standard (Position 1) |
| Weight | 11.26 LB |
