Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 9" Stroke
- Steel Rails
- Ball Bearing
- 1 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Intermediate Stroke | N/A |
| Port Size | 1/4 |
| Support Rod Diameter | 20 mm |
| Flow Controls | w/o Flow Controls |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Series | HBT |
| Weight per Inch | 0.48 lb |
| Port Type | NPTF |
| Cylinder Seal Material | Buna-N |
| Temperature Range [Min] | 0 °F |
| Slide Type | Thrust Slide |
| Base Wt. | 8.86 lb |
| Slide Orientation | Right Hand (Standard) |
| Temperature Range [Max] | 165 °F |
| Proximity Sensor | No Proximity Sensor |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Bearing Type | Ball Bearing |
| Cylinder Bore Size | 1.5 in |
| Support Rod Material | Steel |
| Positions | 2 Position |
| Port Location | Standard (Position 1) |
| Stroke | 9 in |
| Pressure [Max] | 150 psi |
| Bumpers - Slide | Bumpers w/Adjustable Stop Collar (Both Ends) |
| Slide Configuration Option Code | B4 |
| Cushions - Slide | No Cushions |
| Proximity Sensor Code | None |
| Shock Absorbers - Slide | No Shock Absorber |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Weight | 13.18 LB |
