Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 10" Stroke
- Steel Rails
- Composite Bearing
- 1 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Bumpers - Slide | No Bumpers |
| Base Wt. | 8.86 lb |
| Slide Orientation | Right Hand (Standard) |
| Positions | 2 Position |
| Proximity Sensor Code | None |
| Shock Absorbers - Slide | Shock Absorber w/Stroke Adjuster (Both Ends) |
| Cylinder Seal Material | Buna-N |
| Pressure [Max] | 750 psi |
| Intermediate Stroke | N/A |
| Proximity Sensor | No Proximity Sensor |
| Flow Controls | w/o Flow Controls |
| Cylinder Bore Size | 1.5 in |
| Temperature Range [Min] | 0 °F |
| Port Location | Standard (Position 1) |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Bearing Type | Composite Bearing |
| Support Rod Diameter | 20 mm |
| Temperature Range [Max] | 165 °F |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Cushions - Slide | No Cushions |
| Weight per Inch | 0.48 lb |
| Port Type | NPTF |
| Slide Type | Thrust Slide |
| Support Rod Material | Steel |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Stroke | 10 in |
| Series | HBT |
| Port Size | 1/4 |
| Slide Configuration Option Code | A |
| Weight | 13.66 LB |
