Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 24" Stroke
- Steel Rails
- Composite Bearing w/Oversized Support Rods
- 2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Port Location | Standard (Position 1) |
| Bumpers - Slide | No Bumpers |
| Slide Configuration Option Code | A |
| Cylinder Seal Material | Buna-N |
| Proximity Sensor | No Proximity Sensor |
| Port Size | 3/8 |
| Intermediate Stroke | N/A |
| Slide Orientation | Right Hand (Standard) |
| Proximity Sensor Code | None |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Positions | 2 Position |
| Slide Type | Thrust Slide |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Stroke | 24 in |
| Pressure [Max] | 150 psi |
| Cushions - Slide | No Cushions |
| Temperature Range [Min] | 0 °F |
| Shock Absorbers - Slide | Shock Absorber w/Stroke Adjuster (Both Ends) |
| Temperature Range [Max] | 165 °F |
| Support Rod Diameter | 30 mm |
| Series | HBT |
| Base Wt. | 15.67 lb |
| Bearing Type | Composite Bearing w/Oversized Support Rods |
| Cylinder Bore Size | 2 in |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Port Type | NPTF |
| Flow Controls | w/o Flow Controls |
| Support Rod Material | Steel |
| Weight per Inch | 0.83 lb |
| Weight | 35.59 LB |
