Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 24" Stroke
- Stainless Steel Rails
- Composite Bearing w/Oversized Support Rods
- 50 mm Bore ISO Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
| Slide Orientation | Right Hand (Standard) |
| Bearing Type | Composite Bearing w/Oversized Support Rods |
| Support Rod Diameter | 30 mm |
| Slide Configuration Option Code | B |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Port Location | Standard (Position 1) |
| Base Wt. | 15.67 lb |
| Weight per Inch | 0.83 lb |
| Proximity Sensor | No Proximity Sensor |
| Cylinder Seal Material | Buna-N |
| Flow Controls | w/o Flow Controls |
| Slide Type | Thrust Slide |
| Shock Absorbers - Slide | No Shock Absorber |
| Stroke | 24 in |
| Port Type | NPTF |
| Temperature Range [Min] | 0 °F |
| Bumpers - Slide | Bumpers (Both Ends) |
| Temperature Range [Max] | 165 °F |
| Cylinder Bore Size | 50 mm |
| Port Size | 3/8 |
| Series | HBT |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Cylinder Type | ISO Pneumatic Cylinder |
| Proximity Sensor Code | None |
| Pressure [Max] | 150 psi |
| Intermediate Stroke | N/A |
| Cushions - Slide | No Cushions |
| Positions | 2 Position |
| Support Rod Material | Stainless Steel |
| Weight | 35.59 LB |
