Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 26" Stroke
- Steel Rails
- Ball Bearing
- 2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Cylinder Seal Material | Viton |
| Flow Controls | w/o Flow Controls |
| Cylinder Bore Size | 2 in |
| Intermediate Stroke | N/A |
| Slide Type | Thrust Slide |
| Positions | 2 Position |
| Cushions - Slide | No Cushions |
| Pressure [Max] | 750 psi |
| Proximity Sensor Code | None |
| Temperature Range [Min] | 0 °F |
| Slide Orientation | Right Hand (Standard) |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Shock Absorbers - Slide | No Shock Absorber |
| Support Rod Material | Steel |
| Stroke | 26 in |
| Port Size | 3/8 |
| Support Rod Diameter | 25 mm |
| Proximity Sensor | No Proximity Sensor |
| Series | HBT |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Temperature Range [Max] | 250 °F |
| Bumpers - Slide | Bumpers (Both Ends) |
| Port Location | Standard (Position 1) |
| Base Wt. | 14.35 lb |
| Bearing Type | Ball Bearing |
| Port Type | NPTF |
| Slide Configuration Option Code | B |
| Weight per Inch | 0.64 lb |
| Weight | 30.99 LB |
