Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 46" Stroke
- Steel Rails
- Ball Bearing
- 2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Stroke | 46 in |
| Cylinder Bore Size | 2 in |
| Slide Type | Thrust Slide |
| Slide Configuration Option Code | B |
| Weight per Inch | 0.64 lb |
| Flow Controls | w/o Flow Controls |
| Bearing Type | Ball Bearing |
| Slide Orientation | Right Hand (Standard) |
| Proximity Sensor Code | None |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Series | HBT |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Port Location | Standard (Position 1) |
| Cushions - Slide | No Cushions |
| Proximity Sensor | No Proximity Sensor |
| Shock Absorbers - Slide | No Shock Absorber |
| Temperature Range [Min] | 0 °F |
| Port Type | NPTF |
| Support Rod Diameter | 25 mm |
| Temperature Range [Max] | 250 °F |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Pressure [Max] | 750 psi |
| Port Size | 3/8 |
| Support Rod Material | Steel |
| Intermediate Stroke | N/A |
| Positions | 2 Position |
| Bumpers - Slide | Bumpers (Both Ends) |
| Cylinder Seal Material | Viton |
| Base Wt. | 14.35 lb |
| Weight | 43.79 LB |
