Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 3" Stroke
- Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Base Wt. | 24.45 lb |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Weight per Inch | 0.85 lb |
| Proximity Sensor Code | None |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Positions | 2 Position |
| Intermediate Stroke | N/A |
| Port Location | Standard (Position 1) |
| Bumpers - Slide | Bumpers w/Adjustable Stop Collar (Both Ends) |
| Temperature Range [Max] | 165 °F |
| Slide Configuration Option Code | B4 |
| Port Type | NPTF |
| Bearing Type | Composite Bearing |
| Support Rod Diameter | 30 mm |
| Series | HBT |
| Slide Type | Thrust Slide |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Cushions - Slide | No Cushions |
| Port Size | 3/8 |
| Stroke | 3 in |
| Flow Controls | w/o Flow Controls |
| Slide Orientation | Right Hand (Standard) |
| Pressure [Max] | 150 psi |
| Cylinder Seal Material | Buna-N |
| Shock Absorbers - Slide | No Shock Absorber |
| Support Rod Material | Steel |
| Temperature Range [Min] | 0 °F |
| Cylinder Bore Size | 2.5 in |
| Proximity Sensor | No Proximity Sensor |
| Weight | 27.0 LB |
