Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 6" Stroke
- Stainless Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Cylinder cushions
- Adjustable stop collars
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Reed, hall effect and inductive proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Proximity Sensor | No Proximity Sensor |
| Stroke | 6 in |
| Positions | 2 Position |
| Series | HBT |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Bearing Type | Composite Bearing |
| Base Wt. | 24.45 lb |
| Intermediate Stroke | N/A |
| Cylinder Type | NFPA Pneumatic Cylinder |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Weight per Inch | 0.85 lb |
| Support Rod Diameter | 30 mm |
| Shock Absorbers - Slide | No Shock Absorber |
| Temperature Range [Max] | 165 °F |
| Proximity Sensor Code | None |
| Flow Controls | w/o Flow Controls |
| Slide Configuration Option Code | B4 |
| Port Location | Standard (Position 1) |
| Temperature Range [Min] | 0 °F |
| Cylinder Seal Material | Buna-N |
| Cushions - Slide | No Cushions |
| Slide Type | Thrust Slide |
| Support Rod Material | Stainless Steel |
| Cylinder Bore Size | 2.5 in |
| Port Size | 3/8 |
| Port Type | NPTF |
| Pressure [Max] | 150 psi |
| Slide Orientation | Right Hand (Standard) |
| Bumpers - Slide | Bumpers w/Adjustable Stop Collar (Both Ends) |
| Weight | 29.55 LB |
