Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 8" Stroke
- Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Hydraulic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
| Bearing Type | Composite Bearing |
| Weight per Inch | 0.85 lb |
| Shock Absorbers - Slide | Shock Absorber (Extend Only) |
| Cushions - Slide | No Cushions |
| Support Rod Material | Steel |
| Pressure [Max] | 750 psi |
| Slide Type | Thrust Slide |
| Positions | 2 Position |
| Temperature Range [Max] | 165 °F |
| Port Location | Standard (Position 1) |
| Support Rod Diameter | 30 mm |
| Base Wt. | 24.45 lb |
| Slide Configuration Option Code | A1 |
| Proximity Sensor Code | None |
| Port Type | NPTF |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Port Size | 3/8 |
| Stroke | 8 in |
| Proximity Sensor | No Proximity Sensor |
| Intermediate Stroke | N/A |
| Slide Orientation | Right Hand (Standard) |
| Cylinder Type | NFPA Hydraulic Cylinder |
| Bumpers - Slide | No Bumpers |
| Series | HBT |
| Cylinder Seal Material | Buna-N |
| Flow Controls | w/o Flow Controls |
| Temperature Range [Min] | 0 °F |
| Cylinder Bore Size | 2.5 in |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Weight | 31.25 LB |
