Find a Service Center
- Series HBT 2 Position RH (Std) Thrust Slide
- 9" Stroke
- Steel Rails
- Composite Bearing
- 2 1/2" Bore NFPA Pneumatic Cylinder
description
- The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
- Reed, hall effect and inductive proximity sensors
- Three-position cylinders
- Adjustable stop collars
- Cylinder cushions
- Cylinder with rod lock mechanism
- External bumpers
- Flow controls
- Fluorocarbon (Viton) seals
- Oversized shafting with composite bushings
- Proximity sensors
- Shock absorbers
- Shock ready
- Slides without cylinders
| Cylinder Type | NFPA Pneumatic Cylinder |
| Cushions - Slide | No Cushions |
| Bumpers - Slide | Bumpers (Both Ends) |
| Bearing Type | Composite Bearing |
| Port Size | 3/8 |
| Support Rod Material | Steel |
| Cylinder Seal Material | Buna-N |
| Proximity Sensor Code | None |
| Temperature Range [Min] | 0 °F |
| Flow Controls | w/o Flow Controls |
| Weight per Inch | 0.85 lb |
| Proximity Sensor | No Proximity Sensor |
| Slide Configuration Option Code | B |
| Stroke Tolerance | +0.030 in / -0.000 in |
| Temperature Range [Max] | 165 °F |
| Shock Absorbers - Slide | No Shock Absorber |
| Stroke | 9 in |
| Cylinder Bore Size | 2.5 in |
| Series | HBT |
| Pressure [Max] | 150 psi |
| Slide Type | Thrust Slide |
| Slide Orientation | Right Hand (Standard) |
| Base Wt. | 24.45 lb |
| Port Location | Standard (Position 1) |
| Port Type | NPTF |
| Intermediate Stroke | N/A |
| Support Rod Diameter | 30 mm |
| Dowel Pin Holes | w/o Dowel Pin Holes |
| Positions | 2 Position |
| Weight | 32.1 LB |
