Parker Valvair II Four-Way. Manifold Mounted valves have been trusted for years in applications requiring a heavy-duty, all-metal valve that will shift when called upon, even after being idle for an extended period of time. The solenoid/air pilot design of this valve uses line pressure to shift the spool. Single solenoid valves may be mounted in any position. Double solenoid valves should be mounted horizontally. Synthetic rubber o-ring seals are specially compounded for superior wear and abrasion resistance. Solenoids are encapsulated in epoxy for low power consumption and maximum life. These valves are very tolerant to contamination both inside and out. In dirty applications like foundries, steel mills, tire plants, aggregate plants and mines, they can be real problem solvers.
applications
Foundries
Steel mills
Tire plants
Aggregate plants
Mines
features
Lubrication recommended
Wiring Options
None
Solenoid
Double
Height
8.740 in
Series
Valvair II Series
Return Type
Solenoid
Stations
N/A
Actuator Type
Solenoid
Coil Style
Encapsulated
Lights
Yes
Cv Flow
4.8
Valve Type
4-Way, 2 Position
Basic Size
3/8 in
Valve Duty
Standard Duty
Overrides
No Overrides
Port Size
3/8
Port Type
NPT
Voltage Rating
120 VAC, 60 Hz
Length
10.460 in
Spool Description
N/A
Operator
Solenoid w/Light & Locking Override
Valve Body Style
Manifold Mounted
Operating Pressure Range
35 psi to 140 psi
Operation
Electric
Valve Size
3/8 in
Installed Options
None
Weight
7.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
