Parker Valvair II Four-Way. Manifold Mounted valves have been trusted for years in applications requiring a heavy-duty, all-metal valve that will shift when called upon, even after being idle for an extended period of time. The solenoid/air pilot design of this valve uses line pressure to shift the spool. Single solenoid valves may be mounted in any position. Double solenoid valves should be mounted horizontally. Synthetic rubber o-ring seals are specially compounded for superior wear and abrasion resistance. Solenoids are encapsulated in epoxy for low power consumption and maximum life. These valves are very tolerant to contamination both inside and out. In dirty applications like foundries, steel mills, tire plants, aggregate plants and mines, they can be real problem solvers.
applications
Foundries
Steel mills
Tire plants
Aggregate plants
Mines
features
Lubrication recommended
Series
Valvair II Series
Valve Duty
Standard Duty
Lights
Yes
Valve Body Style
Manifold Mounted
Stations
N/A
Length
10.460 in
Spool Description
N/A
Wiring Options
None
Actuator Type
Solenoid
Return Type
Spring
Valve Type
4-Way, 2 Position
Basic Size
3/8 in
Cv Flow
4.8
Voltage Rating
120 VAC, 60 Hz
Operator
Solenoid w/Light & Locking Override
Height
8.740 in
Port Type
NPT
Overrides
No Overrides
Installed Options
None
Valve Size
3/8 in
Coil Style
Encapsulated
Solenoid
Single
Port Size
3/8
Operating Pressure Range
35 psi to 140 psi
Operation
Electric
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
