Find a Service Center
- Single Row Radial Bearing, 10 mm ID x 30 mm OD x 0.656" Wide, Double Sealed (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0)
description
- The felt seal type ball bearing permits certain design economies, but cannot be assumed to be suitable for all conditions of service.In many cases it is supplemented by other parts for really adequate bearing protection in small equipment such as fractional horsepower motors, electric vacuum cleaners, small gear units, electric and pheumatic tools, etc. Felt seal bearings are recommended for effective grease retention and exclusion of foreign matter. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Fillet Radius | 0.024 in |
| Origin | Single Row Radial |
| Ball Material | Steel |
| Cage Material | Steel |
| Rows of Balls | Single |
| Bore Type | Round Bore |
| Precision Level | Standard (ABEC 1) |
| Precision | Standard |
| Bearing Type | Radial |
| Contact Angle | 0° |
| Seal Type | Light Contact Seals |
| Snap Ring | No Snap Ring |
| Radial Internal Clearance Specification | Normal Clearance |
| O.D. Type | Straight |
| Material | Steel |
| Radial Internal Clearance | Normal |
| Capacity | Standard Capacity |
| icNumber | 7700525 |
| Seal Material | Felt |
| Preload Level | None |
| No. in Set | Single Bearing |
| Enclosure | Double Sealed |
| Temperature Range [Max] | 275 °F |
| O.D. | 30 mm |
| Inner Ring Width | 0.656 in |
| Outer Ring Width | 0.656 in |
| Inch/Metric | Metric Bore |
| I.D. | 10 mm |
| Static Load Rating [Max] | 585 lbf |
| Cage Type | Metal |
| Limiting Speed - Grease | 10500 rpm |
| Locking Device | No Locking Device |
| Lubricant | Polyurea Base |
| Temperature Range [Min] | -30 °F |
| Limiting Speed - Oil | 12250 rpm |
| Dynamic Load Rating | 1490 lbf |
| Weight | 0.1 LB |
| EAN or UPC | 637400593049 |
