Find a Service Center
- 1.330" Center Distance
- 5:1 Ratio
- Shaft Input
- Right Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardian™ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
| Frame Size | Shaft Input, Not a C-Face |
| Output Torque @ RPM | 200 in lb @ 1150 rpm, 235 in lb @ 1750 rpm |
| Center Distance | 1.33 in |
| Frame | N/A |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Washdown Duty | No |
| Reduction Type | Single Reduction |
| Motor Application | General Purpose |
| Output (Shaft or Bore) Size | 5/8 in |
| Base to Centerline of Output Shaft | 1 23/32 in |
| Output Configuration | Right Output |
| Base to Centerline of Input Shaft | 3 3/64 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Input HP @ RPM | 0.84 hp @ 1150 rpm, 1.39 hp @ 1750 rpm |
| Lubrication | None |
| Max. Input HP @ 100 rpm | 0.091 hp |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Housing Material | Cast Iron |
| Bolt Center Length x Bolt Center Width | 4 3/8 in x 3 5/16 in |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Box Height | 4 21/32 in |
| Fan Cooled | No |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Ratio | 5:1 |
| Box Width | 2 7/8 in |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Input (Shaft or Bore) Size | 1/2 in |
| Shaft Assembly Code | J |
| Torque Out @ 1750 rpm | 235 in lb |
| Box Length | 4 1/4 in |
| Input Configuration | Shaft Input |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Family Name | Std Unit |
| Worm Position | Universal |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Use With | 713 |
| Bolt Center | 4 3/8 in x 3 5/16 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Torque Out @ 1150 rpm | 200 in lb |
| Weight | 11.1 LB |
| EAN or UPC | 781711516089 |
