Find a Service Center
- 1.540" Center Distance
- 5:1 Ratio
- Shaft Input
- Left Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Never operate, adjust, or install equipment on a moving conveyor.
- Always follow lock out and tag out procedures when working on conveyor systems.
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardian™ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Use With | 715 |
| Housing Material | Cast Iron |
| Bolt Center Length x Bolt Center Width | 5 1/4 in x 4 5/16 in |
| Lubrication | None |
| Base to Centerline of Input Shaft | 3 29/64 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Input HP @ RPM | 1.15 hp @ 1150 rpm, 1.72 hp @ 1750 rpm |
| Output (Shaft or Bore) Size | 3/4 in |
| Bolt Center | 5 1/4 in x 4 5/16 in |
| Box Width | 3 11/16 in |
| Frame | N/A |
| Torque Out @ 1150 rpm | 285 in lb |
| Box Height | 5 3/8 in |
| Reduction Type | Single Reduction |
| Base to Centerline of Output Shaft | 1 29/32 in |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Shaft Assembly Code | G |
| Fan Cooled | No |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Output Torque @ RPM | 285 in lb @ 1150 rpm, 291 in lb @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Family Name | Std Unit |
| Worm Position | Universal |
| Output Configuration | Left Output |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Box Length | 5 1/8 in |
| Frame Size | Shaft Input, Not a C-Face |
| Ratio | 5:1 |
| Torque Out @ 1750 rpm | 291 in lb |
| Washdown Duty | No |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Center Distance | 1.54 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Input Configuration | Shaft Input |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Weight | 17.1 LB |
| EAN or UPC | 781711516300 |
