Find a Service Center
- 3" Center Distance
- 20:1 Ratio
- Shaft Input
- Left Output
- No Lubricant
features
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Max. Thrust Load @ 1150 rpm | 1000 lb/in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Height | 8 7/8 in |
| Bolt Center | 7 in x 4 in |
| Base to Centerline of Output Shaft | 3 1/4 in |
| Output Configuration | Left Output |
| Frame | N/A |
| Frame Size | Shaft Input, Not a C-Face |
| Housing Material | Cast Iron |
| Torque Out @ 1150 rpm | 2470 in lb |
| Torque Out @ 1750 rpm | 2024 in lb |
| Worm Position | Universal |
| Box Width | 6 49/64 in |
| Motor Application | General Purpose |
| Use With | 730 |
| HP @ RPM | 3 hp @ 1800 rpm |
| Washdown Duty | No |
| Output Torque @ RPM | 2024 in lb @ 1750 rpm, 2470 in lb @ 1150 rpm |
| Max. Overhung Load @ 1750 rpm | 1250 lb/in |
| Max. Thrust Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Input Configuration | Shaft Input |
| Max. Overhung Load @ RPM | 1250 lb/in @ 1150 rpm, 1250 lb/in @ 1750 rpm |
| Family Name | Std Unit |
| Center Distance | 3 in |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Input HP @ RPM | 2.68 hp @ 1150 rpm, 3.14 hp @ 1750 rpm |
| Box Length | 8 45/64 in |
| Fan Cooled | No |
| Ratio | 20:1 |
| Input (Shaft or Bore) Size | 7/8 in |
| Lubrication | None |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Reduction Type | Single Reduction |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Base to Centerline of Input Shaft | 6 1/4 in |
| Weight | 55.1 LB |
| EAN or UPC | 781711648322 |
