Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life
caution
Ideal for use with filters and lubricators
Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
Some chemicals can cause damage
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
Max. Overhung Load @ 1750 rpm
700 lb/in
HP @ RPM
0.08333333 hp @ 1800 rpm
Input Configuration
C-Face Quilled
Worm Position
Universal¦Parallel
Lubrication
None
Frame
56C
Base to Centerline of Input Shaft
3 3/8 in
Output RPM @ 1750 rpm Input
0.97 rpm
Fan Cooled
No
Ratio
1800:1
Center Distance
2.0625 in
Base to Shaft Center Height w/High Vert. Base Kit
4.88 in
Housing Material
Cast Iron
Bore Code
B5
Keyway Size
3/16 x 3/32
Frame Size
56C
Base to Centerline of Output Shaft
4 3/32 in
Box Length
5 13/64 in
Max. Thrust Load @ 1150 rpm
700 lb/in
Output Configuration
Left Output
Bolt Centers w/ Vertical Base Kits (in)
8 3/8 x 4 7/8
Thermal Input Horsepower @ 1750 RPM
N/A
Input (Shaft or Bore) Size
5/8 in
Reduction Type
Double Reduction
Washdown Duty
No
Shaft Assembly Code
G
Motor Application
General Purpose
Base to Shaft Center Height w/Std. Base Kit
4.81 in
Base to Shaft Center Height w/Low Vert. Base Kit
3.13 in
Box Width
9 55/64 in
Bolt Centers w/ Std. Base Kit (in)
6 3/8 x 4 11/16
Bolt Centers w/ Vertical "J" Base Kit (in)
8.63 x 2.63
Family Name
FWA
Bolt Center
5 in x 2 7/8 in
Base to Shaft Center Height w/Vert. "J" Base Kit
3.94 in
Torque Out @ 1750 rpm
900 in lb
Torque Out @ 1150 rpm
N/A
Motor HP
0.17 hp
Output (Shaft or Bore) Size
1 in
Box Height
6 25/64 in
Weight
35.1 LB
EAN or UPC
884107007434
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
