Skip to content Skip to navigation menu
700 Series C-Face Quilled Double Reduction Right Angle Reducer

FWC718-150-B4-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer
Item #101350435
  • 1 3/4" Center Distance
  • 150:1 Ratio
  • 42CZ Frame
  • C-Face Quilled Input
  • Left Output
  • Universal, Right Angle Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Double Reduction Right Angle Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1 3/4" Center Distance
  • 150:1 Ratio
  • 42CZ Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Lubrication of Acme Nut assemblies determines the ultimate life of the assembly. Improper maintenance and dirty environment will lead to premature failure.
Torque Out @ 1750 rpm 580 in lb
Bolt Centers w/ Vertical "J" Base Kit (in) 7.63 x 2.50
Base to Centerline of Output Shaft 2 1/16 in
Keyway Size 1/8 x 1/16
Torque Out @ 1150 rpm N/A
Output Configuration Left Output
Reduction Type Double Reduction
Base to Centerline of Input Shaft N/A
Base to Shaft Center Height w/Vert. "J" Base Kit 3.5 in
Max. Thrust Load @ 1150 rpm 500 lb/in
Bore Code B4
Center Distance 1 3/4 in
Shaft Assembly Code G
Washdown Duty No
Base to Shaft Center Height w/Low Vert. Base Kit 3 in
Housing Material Cast Iron
Thermal Input Horsepower @ 1750 RPM N/A
Ratio 150:1
Base to Shaft Center Height w/Std. Base Kit 4.38 in
Motor HP 1/4 hp
Box Width 8 7/8 in
Bolt Centers w/ Vertical Base Kits (in) 7.38 x 4.00
Frame Size 42CZ
Base to Shaft Center Height w/High Vert. Base Kit 4.38 in
Output (Shaft or Bore) Size 7/8 in
Lubrication None
HP @ RPM 0.25 hp @ 1800 rpm
Box Length 5 1/16 in
Max. Overhung Load @ 1750 rpm 500 lb/in
Worm Position Universal¦Right Angle
Input Configuration C-Face Quilled
Output RPM @ 1750 rpm Input 11.67 rpm
Bolt Centers w/ Std. Base Kit (in) 5 3/4 x 4 1/2
Input (Shaft or Bore) Size 1/2 in
Bolt Center 4 3/16 in x 2 3/4 in
Frame 42CZ
Motor Application General Purpose
Box Height 5 3/4 in
Family Name FWC
Fan Cooled No
Weight 26.1 LB
EAN or UPC 781711524329
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison