Skip to content Skip to navigation menu
700 Series C-Face Quilled Double Reduction Right Angle Reducer

FWC718-200-B5-G

700 Series C-Face Quilled Double Reduction Right Angle Reducer
Item #101882852
  • 1 3/4" Center Distance
  • 200:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output
  • Universal, Right Angle Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Double Reduction Right Angle Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1 3/4" Center Distance
  • 200:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Frame Size 56C
Family Name FWC
Keyway Size 3/16 x 3/32
Housing Material Cast Iron
Output (Shaft or Bore) Size 7/8 in
Bore Code B5
HP @ RPM 0.25 hp @ 1800 rpm
Base to Centerline of Input Shaft N/A
Frame 56C
Box Height 5 3/4 in
Shaft Assembly Code G
Lubrication None
Base to Shaft Center Height w/Low Vert. Base Kit 3 in
Base to Shaft Center Height w/Std. Base Kit 4.38 in
Fan Cooled No
Max. Overhung Load @ 1750 rpm 500 lb/in
Center Distance 1.75 in
Washdown Duty No
Ratio 200:1
Reduction Type Double Reduction
Bolt Centers w/ Std. Base Kit (in) 5 3/4 x 4 1/2
Bolt Center 4 3/16 in x 2 3/4 in
Base to Shaft Center Height w/High Vert. Base Kit 4.38 in
Bolt Centers w/ Vertical Base Kits (in) 7.38 x 4.00
Worm Position Universal¦Right Angle
Thermal Input Horsepower @ 1750 RPM N/A
Base to Shaft Center Height w/Vert. "J" Base Kit 3.5 in
Output RPM @ 1750 rpm Input 8.75 rpm
Max. Thrust Load @ 1150 rpm 500 lb/in
Base to Centerline of Output Shaft 2 1/16 in
Input Configuration C-Face Quilled
Output Configuration Left Output
Box Width 8 7/8 in
Motor HP 0.25 hp
Torque Out @ 1150 rpm N/A
Bolt Centers w/ Vertical "J" Base Kit (in) 7.63 x 2.50
Torque Out @ 1750 rpm 660 in lb
Box Length 5 1/16 in
Input (Shaft or Bore) Size 5/8 in
Motor Application General Purpose
Weight 26.1 LB
EAN or UPC 781711525494
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison