Find a Service Center
- Size 1214
- 1.35:1 Ratio
- Single, Clockwise, Left Output Shaft
- Shaft Input, Facing You
description
- Designed for industrial applications where low speed/high torque drives are required.
features
- Compact, rugged construction
- Precision straight or spiral tooth bevel gears
- Shafts are ground and polished, heat treated alloy steel
- One-piece housing constructed from 60-45-10 ductile iron
- All shafts are supported by two tapered roller bearings
- Keys on the projecting shafts
- By interchanging the vent plug and drain plug you can invert the unit, thereby changing the shaft location and rotation
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Input Configuration | Shaft Input |
| Input (Shaft or Bore) Size | 1 in |
| Relative Shaft Rotation | Clockwise |
| Bearing Type | Roller Bearing |
| Unit Size | 1214 |
| Output Relation to Base | No Base |
| Box Length | 8 1/8 in |
| Input Shaft Position | Facing You |
| Box Width | 7 in |
| Output Configuration | Single |
| Torque Out @ 1750 rpm | 703 in lb |
| Output RPM @ 1750 rpm Input | 1296 rpm |
| Input Relation to Base | No Base |
| Washdown Duty | No |
| Torque Out @ 1150 rpm | 776 in lb |
| Bolt Hole Pattern | 4.25 in x 4.25 in |
| Ratio | 1.35:1 |
| Output (Shaft or Bore) Size | 1 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Box Height | 4 1/8 in |
| Assembly | B |
| Gear Style | Spiral Bevel |
| Output Shaft Position | Left |
| Shaft Arrangement | #1 |
| Weight | 25.002 LB |
| EAN or UPC | 781711610398 |
