Find a Service Center
- Size 1214
- 2:1 Ratio
- Single, Counter Clockwise, Left Output Shaft
- Shaft Input, Facing You
description
- Designed for industrial applications where low speed/high torque drives are required.
features
- Compact, rugged construction
- Precision straight or spiral tooth bevel gears
- Shafts are ground and polished, heat treated alloy steel
- One-piece housing constructed from 60-45-10 ductile iron
- All shafts are supported by two tapered roller bearings
- Keys on the projecting shafts
- By interchanging the vent plug and drain plug you can invert the unit, thereby changing the shaft location and rotation
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Box Height | 4 1/8 in |
| Assembly | F |
| Ratio | 2:1 |
| Shaft Arrangement | #4 |
| Output RPM @ 1750 rpm Input | 875 rpm |
| Unit Size | 1214 |
| Gear Style | Spiral Bevel |
| Bolt Hole Pattern | 4.25 in x 4.25 in |
| Relative Shaft Rotation | Counter Clockwise |
| Input Relation to Base | No Base |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Input Configuration | Shaft Input |
| Output Relation to Base | No Base |
| Box Width | 7 in |
| Input Shaft Position | Facing You |
| Input (Shaft or Bore) Size | 1 in |
| Box Length | 8 1/8 in |
| Output Configuration | Single |
| Output Shaft Position | Left |
| Bearing Type | Roller Bearing |
| Torque Out @ 1150 rpm | 697 in lb |
| Torque Out @ 1750 rpm | 563 in lb |
| Washdown Duty | No |
| Output (Shaft or Bore) Size | 1 in |
| Weight | 25.001 LB |
| EAN or UPC | 781711610497 |
