Find a Service Center
- Size 1216
- 1.35:1 Ratio
- Double, Left - Clockwise/Rear - Clockwise, Left & Rear Output Shaft
- Shaft Input, Facing You
description
- Designed for industrial applications where low speed/high torque drives are required.
features
- Compact, rugged construction
- Precision straight or spiral tooth bevel gears
- Shafts are ground and polished, heat treated alloy steel
- One-piece housing constructed from 60-45-10 ductile iron
- All shafts are supported by two tapered roller bearings
- Keys on the projecting shafts
- By interchanging the vent plug and drain plug you can invert the unit, thereby changing the shaft location and rotation
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Ratio | 1.35:1 |
| Bolt Hole Pattern | 4.25 in x 4.25 in |
| Bearing Type | Roller Bearing |
| Input Relation to Base | No Base |
| Output Shaft Position | Left & Rear |
| Input Configuration | Shaft Input |
| Output Configuration | Double |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Output Relation to Base | No Base |
| Output RPM @ 1750 rpm Input | 1296 rpm |
| Box Width | 7 in |
| Assembly | K |
| Gear Style | Bevel |
| Torque Out @ 1150 rpm | 776 in lb |
| Input Shaft Position | Facing You |
| Box Length | 9 in |
| Shaft Arrangement | #32 |
| Washdown Duty | No |
| Relative Shaft Rotation | Left - Clockwise, Rear - Clockwise |
| Output (Shaft or Bore) Size | 1 in |
| Box Height | 4 1/8 in |
| Input (Shaft or Bore) Size | 1 in |
| Unit Size | 1216 |
| Torque Out @ 1750 rpm | 703 in lb |
| Weight | 24.002 LB |
| EAN or UPC | 781711611135 |
