Find a Service Center
- Size 1216
- 1.5:1 Ratio
- Double, Left - Counter Clockwise/Rear - Clockwise, Left & Rear Output Shaft
- Shaft Input, Facing You
description
- Designed for industrial applications where low speed/high torque drives are required.
features
- Compact, rugged construction
- Precision straight or spiral tooth bevel gears
- Shafts are ground and polished, heat treated alloy steel
- One-piece housing constructed from 60-45-10 ductile iron
- All shafts are supported by two tapered roller bearings
- Keys on the projecting shafts
- By interchanging the vent plug and drain plug you can invert the unit, thereby changing the shaft location and rotation
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Torque Out @ 1150 rpm | 785 in lb |
| Ratio | 1.5:1 |
| Input Configuration | Shaft Input |
| Washdown Duty | No |
| Output Shaft Position | Left & Rear |
| Output Relation to Base | No Base |
| Assembly | L |
| Shaft Arrangement | #34 |
| Bolt Hole Pattern | 4.25 in x 4.25 in |
| Bearing Type | Roller Bearing |
| Box Width | 7 in |
| Box Length | 9 in |
| Box Height | 4 1/8 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Output (Shaft or Bore) Size | 1 in |
| Unit Size | 1216 |
| Output Configuration | Double |
| Input Shaft Position | Facing You |
| Relative Shaft Rotation | Left - Counter Clockwise, Rear - Clockwise |
| Output RPM @ 1750 rpm Input | 1167 rpm |
| Input Relation to Base | No Base |
| Input (Shaft or Bore) Size | 1 in |
| Torque Out @ 1750 rpm | 712 in lb |
| Gear Style | Bevel |
| Weight | 24.002 LB |
| EAN or UPC | 781711611173 |
