Find a Service Center
- Size 1413
- 2:1 Ratio
- Double, Left - Clockwise/Right - Counter Clockwise, Left & Right Output Shaft
- Shaft Input, Facing You
description
- Designed for industrial applications where low speed/high torque drives are required.
features
- Compact, rugged construction
- Precision straight or spiral tooth bevel gears
- Shafts are ground and polished, heat treated alloy steel
- One-piece housing constructed from 60-45-10 ductile iron
- All shafts are supported by two tapered roller bearings
- Keys on the projecting shafts
- By interchanging the vent plug and drain plug you can invert the unit, thereby changing the shaft location and rotation
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Input (Shaft or Bore) Size | 1 1/4 in |
| Torque Out @ 1750 rpm | 1367 in lb |
| Assembly | D |
| Ratio | 2:1 |
| Input Relation to Base | No Base |
| Relative Shaft Rotation | Clockwise, Counter Clockwise |
| Torque Out @ 1150 rpm | 1596 in lb |
| Box Height | 5 5/8 in |
| Output Configuration | Double |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Bearing Type | Roller Bearing |
| Output Relation to Base | No Base |
| Input Shaft Position | Facing You |
| Shaft Arrangement | #6, #7 |
| Unit Size | 1413 |
| Washdown Duty | No |
| Bolt Hole Pattern | 4.50 in x 4.50 in |
| Input Configuration | Shaft Input |
| Gear Style | Bevel |
| Box Width | 8 3/4 in |
| Box Length | 7 5/8 in |
| Output RPM @ 1750 rpm Input | 875 rpm |
| Output Shaft Position | Left & Right |
| Output (Shaft or Bore) Size | 1 1/4 in |
| Weight | 39.001 LB |
| EAN or UPC | 781711613641 |
