Find a Service Center
- 5 5/32" Center Distance
- 15:1 Ratio
- 210TC or 250UC Frame
- w/Fan
- C-Face Coupled Input
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Box Height | 13 3/4 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| HP @ RPM | 10 hp @ 1800 rpm |
| Output Torque @ RPM | 7700 in lb @ 1150 rpm, 7839 in lb @ 1750 rpm |
| Ratio | 15:1 |
| Base to Centerline of Input Shaft | 10 1/2 in |
| Keyway Size | 5/16 x 5/32 |
| Reduction Type | Single Reduction |
| Max. Thrust Load @ RPM | 1900 lb/in @ 1150 rpm, 1900 lb/in @ 1750 rpm |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 18.00 x 10.00 |
| Center Distance | 5 5/32 in |
| Housing Material | Cast Iron |
| Installed Options | Fan |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Torque Out @ 1150 rpm | 7700 in lb |
| Bolt Center Length x Bolt Center Width | 11 in x 5 13/16 in |
| Frame Size | 210TC, 250UC |
| Washdown Duty | No |
| Frame | 210TC, 250UC |
| Bore Code | B11 |
| Bolt Centers w/ Std. Base Kit (in) | 14 1/8 x 8 3/8 |
| Base to Centerline of Output Shaft | 5 5/16 in |
| Input HP @ RPM | 10.5 hp @ 1150 rpm, 16.32 hp @ 1750 rpm |
| Fan Cooled | Yes |
| Max. Thrust Load @ 1150 rpm | 1900 lb/in |
| Base to Shaft Center Height w/Std. Base Kit | 6.44 in |
| Input (Shaft or Bore) Size | 1 3/8 in |
| Box Width | 9 21/32 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 8.63 in |
| Torque Out @ 1750 rpm | 7839 in lb |
| Max. Overhung Load @ 1750 rpm | 2200 lb/in |
| Motor HP | 10 hp |
| Max. Input HP @ 100 rpm | 1.56 hp |
| Motor Application | General Purpose |
| Family Name | RF |
| Max. Overhung Load @ RPM | 2200 lb/in @ 1150 rpm, 2200 lb/in @ 1750 rpm |
| Shaft Assembly Code | J |
| Input Configuration | C-Face Coupled |
| Output Configuration | Right Output |
| Bolt Center | 11" x 5 13/16" |
| Output (Shaft or Bore) Size | 2 in |
| Worm Position | Universal |
| Lubrication | None |
| Box Length | 13 1/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 6.38 in |
| Weight | 216.1 LB |
| EAN or UPC | 781711467817 |
