Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life
caution
Ideal for use with filters and lubricators
Suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow or temperatures outside of the rated range
Some chemicals can cause damage
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
Ratio
600:1
Reduction Type
Double Reduction
Output Configuration
Left Output
Bolt Centers w/ Std. Base Kit (in)
16 1/2 x 9 1/2
HP @ RPM
1.5 hp @ 1800 rpm
Thermal Input Horsepower @ 1750 RPM
N/A
Frame
140TC, 180C
Housing Material
Cast Iron
Input (Shaft or Bore) Size
7/8 in
Base to Centerline of Output Shaft
10 in
Motor HP
1 1/2 hp
Lubrication
None
Motor Application
General Purpose
Center Distance
6 in
Keyway Size
3/16 x 3/32
Box Width
19 1/8 in
Washdown Duty
No
Max. Thrust Load @ 1150 rpm
2100 lb/in
Output (Shaft or Bore) Size
2 1/4 in
Base to Shaft Center Height w/High Vert. Base Kit
9.63 in
Family Name
RFWA
Torque Out @ 1150 rpm
N/A
Box Height
16 1/2 in
Worm Position
Universal¦Parallel
Box Length
10 7/8 in
Bolt Centers w/ Vertical Base Kits (in)
20.88 x 11.75
Bore Code
B7
Bolt Center
12 3/4" x 6 3/8"
Base to Shaft Center Height w/Std. Base Kit
7 3/4 in
Output RPM @ 1750 rpm Input
2.92 rpm
Max. Overhung Load @ 1750 rpm
2400 lb/in
Base to Shaft Center Height w/Low Vert. Base Kit
7.31 in
Input Configuration
C-Face Coupled
Base to Centerline of Input Shaft
7 1/4 in
Fan Cooled
No
Frame Size
140TC, 180C
Torque Out @ 1750 rpm
19000 in lb
Shaft Assembly Code
G
Weight
341.1 LB
EAN or UPC
781711530818
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
