RFWC718-900-B4-G

700 Series C-Face Coupled Double Reduction Right Angle Reducer

Item #101877750

Universal, Right Angle Worm Position

No Lubricant

Cast Iron

+ Show More

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Drives used in a vertical mounting application may require additional pipe plugs and/or grease fittings for proper lubrication and are considered special.
High loads, high ambient or operating temperatures, and unusually contaminated atmospheres will require more frequent relubrication.

Specifications

Input (Shaft or Bore) Size	1/2 in
Input Configuration	C-Face Coupled
Output RPM @ 1750 rpm Input	1.94 rpm
Box Length	5 1/16 in
Bolt Center	4 3/16 in x 2 3/4 in
Washdown Duty	No
Shaft Assembly Code	G
HP @ RPM	0.08333333 hp @ 1800 rpm
Torque Out @ 1750 rpm	710 in lb
Base to Centerline of Input Shaft	N/A
Center Distance	1 3/4 in
Bore Code	B4
Frame Size	42CZ
Box Width	8 7/8 in
Keyway Size	1/8 x 1/16
Bolt Centers w/ Std. Base Kit (in)	5 3/4 x 4 1/2
Base to Shaft Center Height w/Vert. "J" Base Kit	3.5 in
Lubrication	None
Ratio	900:1
Base to Centerline of Output Shaft	2 1/16 in
Motor HP	0.17 hp
Worm Position	Universal¦Right Angle
Housing Material	Cast Iron
Output Configuration	Left Output
Frame	42CZ
Box Height	5 3/4 in
Bolt Centers w/ Vertical Base Kits (in)	7.38 x 4.00
Reduction Type	Double Reduction
Torque Out @ 1150 rpm	N/A
Bolt Centers w/ Vertical "J" Base Kit (in)	7.63 x 2.50
Motor Application	General Purpose
Base to Shaft Center Height w/Std. Base Kit	4.38 in
Base to Shaft Center Height w/High Vert. Base Kit	4.38 in
Family Name	RFWC
Max. Overhung Load @ 1750 rpm	500 lb/in
Thermal Input Horsepower @ 1750 RPM	N/A
Base to Shaft Center Height w/Low Vert. Base Kit	3 in
Fan Cooled	No
Output (Shaft or Bore) Size	7/8 in
Max. Thrust Load @ 1150 rpm	500 lb/in
Weight	34.1 LB
EAN or UPC	781711530993