Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life
caution
Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
Max. Thrust Load @ 1150 rpm
900 lb/in
Lubrication
None
Base to Centerline of Input Shaft
N/A
Ratio
1200:1
Input (Shaft or Bore) Size
5/8 in
Reduction Type
Double Reduction
Family Name
RFWC
Torque Out @ 1150 rpm
N/A
Bore Code
B5
Base to Shaft Center Height w/Vert. "J" Base Kit
4.75 in
Max. Overhung Load @ 1750 rpm
1000 lb/in
Motor Application
General Purpose
Box Width
6 in
Output RPM @ 1750 rpm Input
1.46 rpm
Output Configuration
Left Output
Torque Out @ 1750 rpm
1950 in lb
Box Height
8 in
Frame
56C
Bolt Center
6 3/8 in x 3 3/8 in
Bolt Centers w/ Vertical "J" Base Kit (in)
10.38 x 3.13
Worm Position
Universal¦Right Angle
Washdown Duty
No
Output (Shaft or Bore) Size
1 1/8 in
Base to Shaft Center Height w/High Vert. Base Kit
5.59 in
Thermal Input Horsepower @ 1750 RPM
N/A
Frame Size
56C
Bolt Centers w/ Std. Base Kit (in)
8 x 5 1/4
Keyway Size
3/16 x 3/32
Input Configuration
C-Face Coupled
Motor HP
0.17 hp
HP @ RPM
0.25 hp @ 1800 rpm
Housing Material
Cast Iron
Center Distance
2 5/8 in
Base to Centerline of Output Shaft
2 15/16 in
Box Length
11 21/32 in
Fan Cooled
No
Bolt Centers w/ Vertical Base Kits (in)
10.13 x 5.75
Base to Shaft Center Height w/Std. Base Kit
5.81 in
Shaft Assembly Code
G
Base to Shaft Center Height w/Low Vert. Base Kit
3.63 in
Weight
63.1 LB
EAN or UPC
781711531174
We're here for you
with Service Centers across the country - We have your back