S732-40E-G

S/R Worm Gear Reducer, Hollow O/P Shaft w/ no Base

Item #101840491

Auto Replenish

each One-time purchase

Product Details

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

Drives used in a vertical mounting application may require additional pipe plugs and/or grease fittings for proper lubrication and are considered special.
High loads, high ambient or operating temperatures, and unusually contaminated atmospheres will require more frequent relubrication.

Specifications

Center Distance	3 1/4 in
Box Width	5 7/8 in
Bolt Centers w/ Vertical Base Kits (in)	11 7/8 x 6 1/8
Output RPM @ Input RPM	44 rpm @ 1750 rpm
Box Height	9 3/8 in
Base to Shaft Center Height w/High Vert. Base Kit	6 1/4 in
Output Configuration	Hollow Output
Ratio	40:1
Base to Shaft Center Height w/Low Vert. Base Kit	4 11/16 in
Frame	N/A
HP @ RPM	2 hp @ 1800 rpm
Bolt Centers w/ Std. Base Kit (in)	9 1/2 x 6 1/8
Output RPM @ 1750 rpm Input	43.75 rpm
Max. Input HP @ 100 rpm	0.25 hp
Output (Shaft or Bore) Size	1 15/16 in
Base to Shaft Center Height w/Std. Base Kit	6 3/4 in
Family Name	S
Box Length	9 in
Input HP @ RPM	1.75 hp @ 1150 rpm, 2.55 hp @ 1750 rpm
Frame Size	Shaft Input, Not a C-Face
Input (Shaft or Bore) Size	7/8 in
Input Configuration	Shaft Input
Use With	732
Motor Application	General Purpose
Washdown Duty	No
Fan Cooled	No
Weight	78.1 LB
EAN or UPC	781711144718