Find a Service Center
- 6" Center Distance
- 300:1 Ratio
- Shaft Input
- Left Output
- Universal, Parallel Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Bolt Centers w/ Vertical Base Kits (in) | 20.88 x 11.75 |
| Washdown Duty | No |
| Output Configuration | Left Output |
| Box Height | 16 1/2 in |
| Ratio | 300:1 |
| Frame | N/A |
| Fan Cooled | No |
| Base to Shaft Center Height w/Std. Base Kit | 7 3/4 in |
| Family Name | WA |
| Output (Shaft or Bore) Size | 2 1/4 in |
| Box Width | 19 1/8 in |
| Bolt Centers w/ Std. Base Kit (in) | 16 1/2 x 9 1/2 |
| Input Configuration | Shaft Input |
| Shaft Assembly Code | G |
| Torque Out @ 1150 rpm | N/A |
| Base to Centerline of Input Shaft | 7 1/4 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Lubrication | None |
| Input (Shaft or Bore) Size | 7/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 9.63 in |
| Bolt Center | 12 3/4" x 6 3/8" |
| Base to Shaft Center Height w/Low Vert. Base Kit | 7.31 in |
| Motor Application | General Purpose |
| Output RPM @ 1750 rpm Input | 5.8 rpm |
| Max. Overhung Load @ 1750 rpm | 2400 lb/in |
| Center Distance | 6 in |
| Base to Centerline of Output Shaft | 10 in |
| Torque Out @ 1750 rpm | 18500 in lb |
| Housing Material | Cast Iron |
| HP @ RPM | 3 hp @ 1800 rpm |
| Reduction Type | Double Reduction |
| Max. Thrust Load @ 1150 rpm | 2100 lb/in |
| Worm Position | Universal¦Parallel |
| Frame Size | Shaft Input, Not a C-Face |
| Box Length | 10 7/8 in |
| Weight | 315.1 LB |
| EAN or UPC | 781711523711 |
