Find a Service Center
Alternate Products
- Finished Steel Gear
- 10 Diametral Pitch
- 20.0° Pressure Angle
- 14 Teeth
- 1.400" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- Four ball wear test 40 kg: 63 mm
- More cost effective, quieter running and metallic options
| Set Screw Size | 5/8 |
| Hub Dia. | 1.11 in |
| Origin | Finished Bore |
| Bore Size | 0.625 in |
| Set Screw | Yes |
| Pitch Diameter | 1.4 in |
| Bore Type | Finished |
| Torque at 200 RPM | 431 lb/in |
| Torque at 900 RPM | 312 lb/in |
| Keyway | w/Setscrew |
| Outside Dia. | 1.6 in |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 1.87 in |
| Torque at 1800 RPM | 230 lb/in |
| Torque at 300 RPM | 409 lb/in |
| Material | Steel |
| Pressure Angle | 20 ° |
| Diametral Pitch | 10 |
| Torque at 1200 RPM | 279 lb/in |
| No. of Teeth | 14 |
| Torque at 600 RPM | 354 lb/in |
| Weight | 0.401 LB |
| EAN or UPC | 781711461747 |
