Find a Service Center
Alternate Products
- Finished Steel Gear
- 10 Diametral Pitch
- 20.0° Pressure Angle
- 18 Teeth
- 1.800" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Four ball wear test 40 kg: 63 mm
- More cost effective, quieter running and metallic options
- Base oil viscosity: 500 SUS @ 100 °F
- Reliability from steel, cast iron and brass
- Parallel shaft applications
| Hardened Teeth | Without Hardened Teeth |
| Torque at 1200 RPM | 356 lb/in |
| Hub Dia. | 1.41 in |
| Pitch Diameter | 1.8 in |
| Keyway | w/Setscrew |
| Torque at 200 RPM | 599 lb/in |
| Material | Steel |
| Set Screw | Yes |
| Torque at 300 RPM | 561 lb/in |
| Bore Type | Finished |
| Bore Size | 0.875 in |
| Torque at 1800 RPM | 287 lb/in |
| Origin | Finished Bore |
| Outside Dia. | 2 in |
| Torque at 900 RPM | 406 lb/in |
| Torque at 600 RPM | 471 lb/in |
| Diametral Pitch | 10 |
| Length Through Bore | 1.87 in |
| No. of Teeth | 18 |
| Set Screw Size | 7/8 |
| Pressure Angle | 20 ° |
| Weight | 0.901 LB |
| EAN or UPC | 781711461785 |
