Skip to content Skip to navigation menu
765805 / Setscrew Lock Ball Bearing

VF2S-223AH

765805 / Setscrew Lock Ball Bearing
Item #100935589
  • Inch
  • Single Lip Contact with Flinger Seal
  • Normal Mounted Unit Duty
  • 2-Bolt Flange
  • Cast Iron Housing Material
  • 1.44 in Inside Diameter
+ Show More + Show Less
765805 / Setscrew Lock Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Inch
  • Single Lip Contact with Flinger Seal
  • Normal Mounted Unit Duty
  • 2-Bolt Flange
  • Cast Iron Housing Material

features

  • Powder coat epoxy cast iron housing
  • Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
  • Single lip contact seal and flinger
  • Air Handling noise check for quiet operation
  • Looser than standard housing fit for ease of alignment on lightweight frames

options

  • Air Handling Housing Fit, Noise Tested
Housing Material Cast Iron
Housing Construction One Piece
Relubricatable Yes
Insert Material 52100 Bearing Steel, Black Oxided Inner
Radial Static Load Capacity 3493 lb
Overall Length (in) 6.125
Bore Shape Straight
Platform Air Handling
Overall Height to Inner Ring 1.75 in
Housing Base Semi-Solid
Foot Height (in) 0.594
Housing Width 1.16 in
Radial Dynamic Load Capacity (lb) 5782
Centerline to Front Face (in) 1
Outer Ring Land Profile Standard
Overall Height to Inner Ring (in) 1.75
Bearing Insert Coating Black Oxide Coated Inner Ring
Bolt Center-to-Center Length (in) 5.125
Retainer Type Ball Riding Retainer
Misalignment Type Static Only
I.D. 1.44 in
Radial Dynamic Load Capacity 5782 lb
Heat Treat Method (Inner Race) Zone-Hardened
Replaceable Insert Yes
End Cap No
Radial Static Load Capacity (lb) 3493
Measure Units Inch
Insert No. VS-223
Foot Height 0.59 in
Bolt Size 1/2 in
Seal Type Single Lip Contact with Flinger
Inner Race Heat Treat Method Zone-Hardened
Mounted Unit Duty Normal
Bore Size - Inch 1.438
Housing Width (in) 1.15625
Bore Type Straight
Finish Black Oxide Coated Inner Ring
Maximum Operating Temperature 200
Duty Series Normal
Inner Ring OD (in) 1.859
Internal Clearance Standard
Bolt Size (in) 1/2
Inch/Metric Inch
Retainer Material Molded Fiber Glass Reinforced Nylon
Expansion No
Lubrication Lithium Complex NLGI 2 Grease
Flange Type 2-Bolt Flange
Pilot Configuration No Pilot
Overall Width (in) 3.625
Overall Width 3.63 in
Weight 2.66 LB
EAN or UPC 662460066073
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison