Skip to content Skip to navigation menu
766511 / Setscrew Lock Ball Bearing

VF4S-210AH

766511 / Setscrew Lock Ball Bearing
Item #100935676
  • Inch
  • Single Lip Contact with Flinger Seal
  • Normal Mounted Unit Duty
  • 4-Bolt Flange
  • Cast Iron Housing Material
  • 0.63 in Inside Diameter
+ Show More + Show Less
766511 / Setscrew Lock Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Inch
  • Single Lip Contact with Flinger Seal
  • Normal Mounted Unit Duty
  • 4-Bolt Flange
  • Cast Iron Housing Material

features

  • Powder coat epoxy cast iron housing
  • Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
  • Single lip contact seal and flinger
  • Air Handling noise check for quiet operation
  • Looser than standard housing fit for ease of alignment on lightweight frames

options

  • Air Handling Housing Fit, Noise Tested
Inner Ring OD (in) 0.969
Pilot Configuration No Pilot
Overall Width (in) 3
End Cap No
Radial Static Load Capacity 1117 lb
Bore Shape Straight
Housing Construction One Piece
Length Through Bore 1.03 in
Finish Black Oxide Coated Inner Ring
Insert No. VS-210
Bore Type Straight
Internal Clearance Standard
Bolt Size (in) 0.3750
Housing Base Semi-Solid
Bolt Center-to-Center Length (in) 2.1250
T Core 1.75
Expansion No
Radial Dynamic Load Capacity 2108 lb
Outer Ring Land Profile Standard
Inner Race Length (in) 1.031
Duty Series Normal
Relubricatable Yes
Measure Units Inch
Radial Dynamic Load Capacity (lb) 2108
Flange Type 4-Bolt Flange
RPM [Max] 7500 rpm
Misalignment Type Static Only
Overall Width 3 in
Retainer Type Ball Riding Retainer
Maximum Operating Temperature 200
Foot Height 0.38 in
Seal Type Single Lip Contact with Flinger
Bearing Insert Coating Black Oxide Coated Inner Ring
Overall Length (in) 3
Replaceable Insert Yes
Foot Height (in) 0.375
I.D. 0.63 in
Lubrication Lithium Complex NLGI 2 Grease
Housing Width (in) 3
Centerline to Front Face (in) 0.625
Inner Race Heat Treat Method Zone-Hardened
Mounted Unit Duty Normal
Heat Treat Method (Inner Race) Zone-Hardened
Overall Height (in) 1.078
Bolt Size 0.38 in
Radial Static Load Capacity (lb) 1117
Platform Air Handling
Bore Size - Inch 0.625
Inch/Metric Inch
Housing Width 3 in
Insert Material 52100 Bearing Steel, Black Oxided Inner
Housing Material Cast Iron
Length Through Bore (in) 1.031
Retainer Material Molded Fiber Glass Reinforced Nylon
Weight 1.0 LB
EAN or UPC 662460066141
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison