Find a Service Center
- 1.625 Length Through Bore (in)
features
- Bevel and Miter Gears Develop Axial Thrust
- Adequate Bearing support Must be Provided
- Miter Gears must be run in sets of two or more gears with the same pitch, Pressure angle and number of teeth
- Spiral Bevel and Miter Gears have continuous pitch line contact and are smoother and quieter than straight tooth gears. Spiral Bevel and Miter gears must be run in sets of mating gears with opposite hand spiral.
- Browning Gears are rated in accordance with AGMA standards
| Mounting Distance | 2.437 |
| Face Width (in) | 0.57 |
| Hub Diameter (in) | 2 |
| Hub Projection (in) | 0.9375 |
| Bore (Max) (in) | 0.875 |
| Length Through Bore (in) | 1.625 |
| Number of Teeth/Threads | 25 |
| Bore Size (in) | 0.875 |
| Spiral Gear Hand Direction | RIGHT |
| Material | Steel |
| Bore (Min) (in) | 0.875 |
| Lead/Helix Angle | 35 |
| Bore Type | Finished Bore |
| Diametral Pitch | 10 |
| Pitch Diameter (in) | 2.5 |
| Pressure Angle | 20 |
| Weight | 1.28 LB |
| EAN or UPC | 662289167234 |
