Find a Service Center
- Steel Material
- Finished Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Finish Bore Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
- Browning Gears are rated in accordance with AGMA standards
- When you think "Special" Gears - Think Browning
| Bore Type | Finished Bore |
| Face Width (in) | 0.75 |
| Outside Diameter (in) | 2 |
| Overall Length (in) | 1.25 |
| Diametral Pitch | 16 |
| Bore (Min) (in) | 0.75 |
| Standards Met | AGMA |
| Pressure Angle | 20 |
| Pitch Diameter (in) | 1.875 |
| Bore Size (in) | 0.75 |
| Bore (Max) (in) | 0.75 |
| Hub Diameter (in) | 1.625 |
| Material | Steel |
| Hub Projection (in) | 0.5 |
| Length Through Bore (in) | 1.25 |
| Gear Construction | Plain |
| Bushing Bore Size (in) | 0.7500 |
| Number of Teeth/Threads | 30 |
| Weight | 0.72 LB |
| EAN or UPC | 662289043057 |
