100ULR5

Raider® Shaft Input - Left & Right Output Worm Gear Reducer

Item #101432409

Auto Replenish

each One-time purchase

Product Details

Rugged cast iron housings for all housings, motor adapters, covers, and mounting bases, providing maximum strength and dependability
Integral worm and shaft carburized and hardened to 58CR
Large, single-row ball bearings absorb radial and thrust loads on higher input speeds for increased efficiency
Forged bronze worm gears provide greater tensile strength than cast bronze
Heavy-duty tapered roller bearings
Double-lip seals keep contaminates out and lubrication in
All units factory-filled with oil

Specifications

HP @ RPM	0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm
Box Width	2 1/2 in
Output RPM @ 1750 rpm Input	350 rpm
Thermal Input Horsepower @ RPM	0.4 hp @ 1150 rpm, 0.5 hp @ 1750 rpm
Input HP @ RPM	0.4 hp @ 1150 rpm, 0.5 hp @ 1750 rpm
Washdown Duty	No
Center Distance	1 in
Max. Overhung Load @ RPM	147 lbf @ 1750 rpm
Ratio	5:1
Max. Thrust Load @ 1150 rpm	N/A
Frame	N/A
Base to Shaft Center Height w/Std. Base Kit	1 3/4 in
Input (Shaft or Bore) Size	3/8 in
Output Torque @ RPM	82 in lb @ 1750 rpm, 90 in lb @ 1150 rpm
Box Length	3.3 in
Thermal Input Horsepower @ 1750 RPM	0.5 hp
Frame Size	Shaft Input, Not a C-Face
Base to Shaft Center Height w/Low Vert. Base Kit	1.83 in
Max. Overhung Load @ 1750 rpm	147 lbf
Thermal Output Torque @ RPM	82 in lb @ 1750 rpm, 90 in lb @ 1150 rpm
Base to Shaft Center Height w/High Vert. Base Kit	2.96 in
Max. Input HP @ 100 rpm	0.04 hp
Output Configuration	Left & Right Output
Output RPM @ Input RPM	350 rpm @ 1750 rpm
Torque Out @ 1150 rpm	90 in lb
Input Configuration	Shaft Input
Bolt Centers w/ Std. Base Kit (in)	3 3/4 x 2 7/8
Bolt Centers w/ Vertical Base Kits (in)	5 1/8 x 2 5/16
Output (Shaft or Bore) Size	1/2 in
Motor Application	General Purpose
Torque Out @ 1750 rpm	82 in lb
Box Height	3.63 in
Weight	4.2 LB
EAN or UPC	662288336037